Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Windsor Heights, IA (50324) · Local Professionals

Des Moines Metal Roofing · Fast response in Windsor Heights and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Windsor Heights is a tight-knit suburb wrapped around the intersection of University Avenue and 73rd Street, just west of downtown Des Moines. Most of the housing stock here dates from the 1940s through the 1960s: brick ranches, split-levels, and modest two-story homes on compact lots with mature maples and oaks. The flat to gently rolling terrain means water can pool near foundations, and the original shingle roofs on these homes are now well past their expected lifespan.

Homeowners in Windsor Heights (50324) call Des Moines Metal Roofing because we understand the specific challenges of retrofitting metal over the original shingle layers common in neighborhoods like Windsor Heights and nearby Beaverdale. We know the building department, the permit timelines, and the way ice dams form at the eaves on these low-pitched roofs. When you need a roof that handles hail, wind, and snow without constant repairs, we are the local team to call.

Metal Roofing in Windsor Heights (50324)

Windsor Heights sits on flat to gently rolling glacial till, and many of the 1950s and 1960s ranches and split-levels here have low-slope roofs that were originally shingled. Those roofs are prone to ice damming in winter and moss growth in the humid summers. The tight lots mean access can be tricky for large equipment, and mature trees drop limbs and debris that clog gutters and stress older flashing. We regularly install metal roof over shingles (retrofit) on these homes, which saves the cost and mess of a tear-off while adding a durable, hail-resistant surface. We also handle the flashing, chimney, and skylight repairs that these older brick homes often need, since original galvanized flashing has usually rusted through by now.

Our team has worked throughout Windsor Heights and the surrounding Des Moines neighborhoods, from the streets near Colby Park to the homes along 8th Street and University Avenue. We know the local building department requirements and can help you navigate the permit process for a full replacement or re-roof.

Our services in Windsor Heights

How a Job Works in Windsor Heights

Step 1: Call us at (515) 461-7188 or request a free estimate online. We will schedule an on-site assessment at your Windsor Heights property, inspect your current roof, check the flashing and decking, and discuss your options for metal roofing, including retrofit over existing shingles. You get a written estimate with clear pricing.

Step 2: Once you approve the estimate, we handle the permit application with the City of Windsor Heights and schedule the work. On installation day, our crew arrives with materials and protects your landscaping. For tight lots, we plan material staging carefully. If your home is in an HOA, we can coordinate color and profile approval before ordering. We install the new metal roof, flashing, and trim according to code and manufacturer specifications.

Step 3: After the work is complete, we clean up thoroughly, haul away all debris, and walk the property with you to ensure you are satisfied. We do not leave until your yard and driveway are as clean as we found them.

Pricing for metal roofing in Windsor Heights depends on the size and pitch of your roof, the material you choose, and whether we are doing a retrofit over shingles or a full tear-off. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, metal roof replacement at $9 per square foot, and metal roof over shingles at $7 per square foot. Smaller repair jobs like leak repair start at $450, and flashing or chimney repair starts at $600. For a free, no-obligation estimate tailored to your Windsor Heights home, call us at (515) 461-7188.

My Windsor Heights ranch has its original 1960s shingles. Can you install metal roofing over them without a tear-off?
Yes, if your existing shingles are in good condition and your local code allows it. Many homes in Windsor Heights and similar Des Moines suburbs qualify for a metal roof over shingles (retrofit), which saves you the cost and disruption of a tear-off. We inspect your roof deck and shingle condition during the free estimate to confirm eligibility. If your roof has multiple layers or damage, we will recommend a full replacement.
How quickly can you respond to storm damage or a leaking roof in Windsor Heights?
We prioritize emergency calls for active leaks and storm damage in Windsor Heights and the surrounding areas. Call us at (515) 461-7188, and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We provide free inspections for storm and wind damage and can perform temporary repairs to prevent further water intrusion.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in Windsor Heights?
For a 1,500-square-foot ranch with a simple gable roof, a metal roof replacement typically starts around $9 per square foot, so you might expect a ballpark range of $13,500 to $18,000 depending on material choice, roof pitch, and whether any decking repairs are needed. A retrofit over existing shingles could be lower, starting at $7 per square foot. Call us at (515) 461-7188 for a precise estimate based on your specific roof.
Do I need a permit for a metal roof installation in Windsor Heights, and can you help with the paperwork?
Yes, the City of Windsor Heights generally requires a permit for roof replacements and re-roofs, and the requirements can vary based on the scope of work. Our team is familiar with the local building department and can handle the permit application and inspection scheduling for you. We always recommend verifying current rules with the city, but we will guide you through the process.
My neighbor's tree hangs over my property line in Windsor Heights. Can you trim branches or work around them during installation?
We can work around overhanging branches, but we do not trim trees that belong to a neighbor. If branches interfere with the installation, we will discuss options with you, such as trimming on your side of the property line or adjusting the work plan. For HOA communities, we can also help coordinate any needed approvals before starting.
Are you fully insured for roofing work at my Windsor Heights home?
Yes, Des Moines Metal Roofing is fully insured, carrying both general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Windsor Heights to handle snow and ice?
Metal roofs in Windsor Heights benefit from annual inspections, especially in late fall, to check for loose fasteners, debris in gutters, and snow guard condition. Ice dams can form at the eaves on low-pitch roofs, so we recommend adding snow guards and keeping gutters clear. We offer maintenance plans and can inspect your roof after major storms to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm