Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Indianola, IA (50125) · Local Professionals

Des Moines Metal Roofing · Fast response in Indianola and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Indianola's mix of older brick homes near the square and newer subdivisions off Highway 92 means we see just about every roof style and age. From the historic homes around Buxton Park to the growing neighborhoods near Simpson College, the housing stock here tells a story, and metal roofing fits right in. Our team knows how Indianola weather, from hail to ice dams, affects these roofs.

Homeowners in Indianola (50125) call Des Moines Metal Roofing because we understand local challenges like steep gables on older homes and low-pitch ranches in the newer developments. We're based in Des Moines and serve the surrounding areas, so we're just a short drive away when you need us.

Metal Roofing in Indianola (50125)

Indianola sits on gently rolling terrain with mature trees and varied lot sizes. The older homes near the downtown square often have steep roofs and complex flashings, while newer subdivisions feature simpler rooflines but demand precise installation to handle wind and hail. Our team is experienced with both, and we know how to work around tight lot lines and landscaping. We also understand the local soil conditions and drainage patterns that can affect roof runoff and gutter performance.

We've been serving Indianola and the greater Des Moines area for years, and we've seen firsthand how metal roofing outperforms asphalt shingles in our climate. Whether it's a historic home that needs a sensitive replacement or a new build looking for energy efficiency, we have the skills and products to get it done right.

Our services in Indianola

How a Job Works in Indianola

Step 1: We start with a free on-site assessment. We'll inspect your current roof, discuss your goals, and provide a detailed estimate. We'll also check for any local permit requirements and HOA guidelines if applicable.

Step 2: Once you approve, we schedule the work and handle the permits. On installation day, our crew arrives on time and works efficiently, protecting your landscaping and keeping the site tidy. We coordinate with your schedule and keep you informed.

Step 3: After the job, we do a thorough cleanup, haul away all debris, and walk through the finished roof with you. We don't leave until you're satisfied and your property is clean.

Pricing for metal roofing in Indianola varies based on roof size, complexity, and material. For example, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof repair at $450. Factors like roof pitch, access, and the condition of your existing roof can affect the final cost. We provide free estimates so you know exactly what to expect. Call us at (515) 461-7188 to schedule yours.

My 1920s brick home near the Indianola square has a steep roof with original detailing. Can you install metal without ruining its character?
Yes, we specialize in matching metal roofing profiles to historic homes. We can recommend standing seam or metal shingles that complement the architecture while providing modern durability. We'll also handle any needed flashing and trim to maintain the home's original look.
A storm just rolled through Indianola and I think my roof has hail damage. How quickly can you respond?
We offer free storm damage inspections and can often schedule them within a day or two. Call us at (515) 461-7188 to set up an appointment. We'll assess the damage and provide a detailed report for your insurance claim if needed.
What's the typical cost for a metal roof replacement on a 1,500 square foot ranch in Indianola?
For a basic metal roof replacement, you might expect to pay between $9 and $12 per square foot, so roughly $13,500 to $18,000 for 1,500 square feet. The exact price depends on material choice, roof pitch, and any necessary repairs to the decking. We'll give you a precise quote after inspecting your roof.
Do I need a permit to replace my roof in Indianola, and can you help with that?
Yes, roofing permits are typically required for replacements in Indianola. We handle the permitting process for you, ensuring all work meets local codes. Permit fees and requirements can vary, so we'll verify with the city building department before starting.
My HOA has strict rules about roof color and style. Can you work with them to get approval?
Absolutely. We're familiar with HOA requirements in Indianola and can provide material samples and documentation to help you get approval. We'll coordinate with your HOA to ensure the chosen metal roofing meets their guidelines.
Are you fully insured for roofing work in Indianola?
Yes, we carry general liability insurance and workers' compensation coverage for your protection. We're happy to provide proof of insurance upon request.
What maintenance does a metal roof need in Indianola's climate?
Metal roofs are low-maintenance, but we recommend annual inspections to check for loose fasteners, debris buildup, and signs of wear. Our team can perform these inspections and make any necessary repairs, ensuring your roof lasts for decades.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm