Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Newton, IA (50208) · Local Professionals

Des Moines Metal Roofing · Fast response in Newton and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Newton, Iowa, is a town of solid older brick homes and farm-edge lots, where the housing stock tells the story of a century of midwestern weather. From the historic downtown square to the tree-lined streets near the Newton Arboretum, roofs here take a beating from hail, wind, and ice dams. If your metal roof is leaking, storm-damaged, or due for replacement, we know the local conditions that cause it.

Homeowners in Newton (50208) call Des Moines Metal Roofing because we understand the specific challenges of roofing here: steep gables on older homes, low-pitched ranches, and the need for hail-resistant materials. Whether you are near the Jasper County Courthouse or out by the Newton Speedway, our team is ready to help.

Metal Roofing in Newton (50208)

Newton sits on gently rolling terrain with a mix of historic brick homes, mid-century ranches, and newer construction. The older homes often have steep, complex rooflines that require careful flashing and custom metal work, while the low-slope ranches need proper ventilation and panel profiles that shed water effectively. Many properties have mature trees that drop limbs and debris, leading to punctures and clogged gutters. The soil here is a mix of glacial till and black prairie dirt, which can affect drainage around the foundation, so we pay attention to gutter placement and downspout extensions. Ice dams are a common winter problem, especially on homes with poor attic insulation, and we often recommend snow guards and improved ventilation to prevent them.

Our team has years of experience serving Newton and the surrounding Des Moines area. We have worked on everything from historic homes near the downtown square to modern farm buildings on the outskirts. We know the local permit requirements and can help you navigate the process, whether you are in a historic district or a homeowners association. We use high-quality materials and proven installation methods to ensure your metal roof stands up to Iowa weather for decades.

Our services in Newton

How a Job Works in Newton

Step 1: You call us at (515) 461-7188 or fill out our online form to schedule a free on-site assessment. We will inspect your roof, discuss your options, and provide a detailed written estimate. We take the time to answer your questions and explain the pros and cons of different metal roofing systems.

Step 2: Once you approve the estimate, we schedule the work and obtain any necessary permits from the city of Newton. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption. For homes with tight lot access, we plan ahead for material delivery and staging. If you live in a historic district or HOA, we coordinate with the appropriate parties to ensure compliance with design guidelines.

Step 3: After the installation, we clean up thoroughly, removing all debris and using a magnet to pick up stray screws. We walk through the finished roof with you, answer any final questions, and provide care instructions. We leave your property clean and your new roof ready to protect your home for years to come.

Metal roofing costs in Newton depend on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer coatings, snow guards, and gutter services. Every project is different, so call us at (515) 461-7188 for a free estimate tailored to your home.

My 1920s brick bungalow near Newton's downtown square has a steep gable roof with original shingles. Is metal roofing a good fit?
Yes, metal roofing can be an excellent choice for older homes with steep gables. We often recommend standing seam or metal shingles that mimic the look of traditional materials while providing superior durability. The key is proper flashing and underlayment to protect the historic brick and prevent leaks, especially around chimneys and dormers.
A storm just rolled through Newton and I think my metal roof has wind damage. How quickly can you respond?
We offer free inspections for storm damage and can usually schedule an assessment within a few days. For active leaks, we prioritize emergency repairs. Call us at (515) 461-7188 to get on our schedule. We will document any damage for your insurance claim and provide a detailed repair estimate.
What is the typical cost to replace a metal roof on a 1,500 square foot ranch in Newton?
For a 1,500 square foot ranch with a low-pitch roof, a basic corrugated panel roof might start around $8,000 to $10,000, while standing seam could range from $12,000 to $15,000. Factors like roof complexity, removal of old shingles, and gutter replacement will affect the final price. We provide free estimates so you can get an accurate number.
Do I need a permit from the city of Newton to install a metal roof?
Yes, roofing permits are typically required for roof replacements in Newton. The exact requirements and fees vary, so we recommend checking with the Newton Building Department. We handle the permit application process for you as part of our service, ensuring everything is done correctly.
My HOA has strict rules about roof color and style. Can you help with approval?
Absolutely. We are familiar with many local HOAs and can provide material samples and documentation to help you get approval. We will work with your HOA to ensure the chosen metal roofing meets their guidelines, and we can adjust our schedule to accommodate any review periods.
Are you fully insured for roofing work in Newton?
Yes, Des Moines Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance.
How should I maintain my metal roof in Newton's climate to prevent ice dams and leaks?
Regular maintenance is key. We recommend having your roof inspected annually, especially after severe storms. Keep gutters clear of debris, and consider installing snow guards to prevent ice dams. In winter, avoid using salt or harsh chemicals to melt ice, as they can damage the metal finish. Our team can perform inspections and suggest preventative measures tailored to your roof.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm