Licensed & Insured, in Des Moines and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Des Moines
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (515) 461-7188 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Des Moines and surrounding areas · On-site visits included · Free estimate within 24h
Des Moines Metal Roofing is a team of local certified professionals based in Des Moines. We respond quickly in Des Moines and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (515) 461-7188⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews
“Had these guys put a metal roof on our equipment barn out past Altoona and they knocked it out in about three days with a four-man crew. The gravel lot around the building made staging a little tricky but they kept everything organized and cleaned up every screw and scrap before they left. Really solid work.”
Commercial & Agricultural Metal Roofing
“Our front porch roof was leaking every time it rained hard and I was worried it was going to be a huge mess. They found the problem at the flashing by the porch beam, fixed it, and re-fastened a few loose panels in one afternoon. Two weeks of storms since and it's bone dry.”
Metal Roof Repair
“We've got a farmhouse and barns surrounded by cornfields, and the old barn roof was rusting through in spots. Des Moines Metal Roofing replaced the panels and re-did the flashing around the vents. They even added snow guards so we don't get sheets of ice sliding off onto the equipment. It's a relief knowing it's done right before winter.”
Commercial & Agricultural Metal Roofing
“Went with standing seam on our house and the finished roof looks incredible, the lines are dead straight and the panels are perfectly aligned. The crew of five finished our 2,400 square foot roof in about four days. Only small gripe is they showed up a bit later than the window on day one, but the quality more than made up for it.”
Standing Seam Metal Roofing
“I needed a TV antenna mounted on my metal roof and I was nervous about someone putting holes in it. They came out, sealed the mounting points properly and made sure everything was watertight around the new penetrations. No leaks after a month of rain. Really appreciated how careful they were.”
Metal Roof Repair
“Brand new metal roof on our place and honestly I was surprised how fast it went, under a week from tear-off to the last ridge piece. They hauled away every bit of the old roof and left the yard cleaner than they found it. My wife and I keep looking up at it and just grinning.”
Metal Roof Installation
“Replaced the roof on our brick house with a stone-coated steel system and it completely changed the look of the place, from the street it looks like a high-end tile roof but it's steel. They matched the flashing to the existing brickwork really well and took their time getting the details right. Worth every penny.”
Metal Roof Replacement
“We did the metal roof over our existing shingles on our suburban house and I'm so glad we didn't have to deal with a full tear-off. The crew was in and out in two days and the new gutters they installed with the metal roof look great too. Only thing is I wish they'd given me a little more notice before starting, but the end result is fantastic.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Des Moines · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes panels, underlayment, basic flashing and labor on an accessible single-story roof. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and raised seams; price rises with pitch, panel width and custom flashing. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes impact-rated stamped or granule-coated panels; complex roof shapes add labor hours. |
| Tear-off of existing shingles | Add $1.50 to $3/sq ft | Covers removal, dumpster and disposal; each additional shingle layer adds cost and time. |
| Complex or large-scale job | On estimate | Steep gables, multiple valleys and historic profiles need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (515) 461-7188, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard pitch | Starting at $10/sq ft | Includes tear-off, underlayment, panels, and standard flashing on an accessible roof. |
| Steep or complex roof installation | Starting at $13/sq ft | Adds staging, fall protection, and extra flashing time on steep gables and valleys. |
| 24-gauge upgrade | Adds $1 to $2/sq ft | Heavier steel with better hail and dent resistance for storm-prone neighborhoods. |
| Complex or large-scale job | On estimate | Multi-layer tear-off, historic homes, and unusual geometry need an on-site look first. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and new corrugated or ribbed panels. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners and raised seams, priced higher for detailing on steep or cut-up roofs. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes profile-matched panels and trim, with historic district or HOA review adding time. |
| Complex or historic home | On estimate | Turrets, dormers, multiple old layers, and soft decking need an on-site look before pricing. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Screw-down panel over one shingle layer | Starting at $7/sq ft | Includes deck check, slip sheet, and basic flashing on a simple gable roof. |
| Standing seam over shingles | Starting at $11/sq ft | Concealed fasteners and raised seams, priced higher for steeper pitches and complex layouts. |
| Metal shingle or stone-coated steel retrofit | Starting at $9/sq ft | Includes underlayment and trim; historic-district profiles and colors can add cost. |
| Partial retrofit with tear-off | On estimate | We strip failing slopes and retrofit sound areas, so the scope needs an on-site look. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, single penetration) | Starting at $450 | Includes inspection, replacement screws and washers, and resealing one or two penetrations; pitch and access move the price. |
| Flashing or panel repair | Starting at $650 | Covers rebuilding failed flashing or replacing one damaged panel; roof height and panel count raise the figure. |
| Storm damage repair (multiple panels) | On estimate | Hail or wind damage across several panels needs an on-site look to count panels and check decking. |
| Emergency leak response | On estimate | Same-day or next-day tarping and leak control priced after we see the source and the interior risk. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak point repair | Starting at $450 | Includes diagnosis, one failed fastener or pipe boot fix, and water test verification. |
| Multiple leak points | Starting at $750 | Covers several failed fasteners, boots, or small seam repairs in one visit. |
| Flashing or chimney rebuild | Starting at $950 | Rebuilds flashing at a chimney, skylight, or sidewall with new metal and sealant. |
| Storm or wind damage repair | On estimate | Panel replacement and re-fastening after hail or derechos needs an on-site look. |
| Travel | Included | In Des Moines and surrounding Polk County areas, no separate call-out fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (single slope) | Starting at $750 | Covers pulling and replacing failed screws with new UV washers on one accessible slope |
| Full residential re-fastening | Starting at $1,450 | Every fastener row replaced and torqued, priced by roof size and pitch |
| Washer swap plus sealant | Starting at $950 | New EPDM washers on tight screws plus lap and penetration re-sealing |
| Storm damage re-fastening | On estimate | Wind-lifted or hail-damaged sections need an on-site look before a number is given |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (carport or shed) | Starting at $5.50/sq ft | Includes panels, underlayment, closures, fasteners, and basic trim on a simple roof with standard access. |
| R-panel or 5V ribbed roof (residential) | Starting at $6.25/sq ft | Includes ribbed panels, color-matched screws, ridge and eave closures, and flashing on a typical home roof. |
| Retrofit over existing shingles | Starting at $6.75/sq ft | Includes prep of the existing roof, panels, and closures; code limits on existing layers may require tear-off first. |
| Tear-off and full replacement | Starting at $7.50/sq ft | Includes shingle removal, disposal, deck inspection, underlayment, panels, and trim; soft sheathing adds cost. |
| Complex or large-scale job | On estimate | Steep pitches, many penetrations, historic profiles, or large commercial and agricultural buildings need an on-site look. |
| Estimate | Free | Response within 24 hours at (515) 461-7188, no obligation to book, written scope included. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile | Starting at $9/sq ft | Includes tear-off, underlayment, flashing and panels; steep pitch or deck repair moves the price up. |
| Slate or shake profile | Starting at $11/sq ft | Premium stamped steel with deeper texture; complex valleys and multiple chimneys raise the total. |
| Retrofit over existing shingles | Starting at $8/sq ft | Purlin or batten system over one existing layer; code limits the number of layers allowed. |
| Complex or large-scale job | On estimate | Steep Victorian gables, multiple penetrations and historic review need an on-site look before pricing. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation | From $9/sq ft | Includes tear-off, underlayment, ice-and-water shield, panels and flashing; pitch and roof complexity move the rate. |
| Retrofit over one existing shingle layer | From $7/sq ft | Covers panels and trim over sound decking; code layer limits and deck condition qualify the final figure. |
| Stone-coated steel repair and re-fastening | From $350 | Includes leak diagnosis, panel or fastener replacement and flashing reseal; access and damage extent move the price. |
| Complex or historic-district roof | On estimate | Steep gables, dormers, multiple valleys and design review require an on-site walk before we quote. |
| Travel | Included | In Des Moines and surrounding metro communities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (515) 461-7188, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom forming and soldered joints; small area and steep access raise the rate. |
| Zinc or aluminum accent work | Starting at $18/sq ft | Includes panels, caps and flashing; visibility and detail count move the price. |
| Full architectural specialty metal roof | On estimate | Needs an on-site measure because roof complexity, dormers and valleys drive the total. |
| Copper flashing and trim only | Starting at $1,200 | Includes formed valleys and counterflashing; chimney count and roof pitch affect the figure. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard recoat, sound panels | Starting at $2.50/sq ft | Includes wash, spot prime and one finish coat on clean panels with light chalk. |
| Rust treatment and two-coat system | Starting at $3.50/sq ft | Adds rust converter, bare-metal primer and a second topcoat for older corrugated roofs. |
| Seam and fastener reseal | Starting at $1.25/linear ft | Replaces failed washers and reseals laps and penetrations before coating. |
| Commercial or steep-access job | On estimate | Pitch, height and staging drive the number, so we walk the roof before quoting. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single detail flashing repair | Starting at $600 | Covers one chimney face, skylight curb or valley reflash with new bent metal and sealant. |
| Chimney flashing rebuild | Starting at $850 | Full step and counterflashing rebuild tied into masonry, with old sealant and damaged metal removed. |
| Skylight curb reflash | Starting at $750 | New curb flashing and seal replacement, priced higher for steep pitch or second-story access. |
| Multiple details or hidden damage | On estimate | Jobs with rotted decking, masonry repair or three or more details need an on-site look first. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-plane roof, standard pad or clamp-on guards | Starting at $1,200 | Covers layout, guards, and fasteners on one straightforward roof plane, with row count driving the final number. |
| Multi-plane roof with two or more protected zones | Starting at $1,850 | Includes guard rows over entries, walkways, and driveways, priced by linear footage and roof pitch. |
| Bar-style snow rails on steep gables | Starting at $2,400 | Bracket-mounted rails for long panel runs, with access and fall protection adding labor on steep roofs. |
| Heat cable and eave ice control add-on | Starting at $650 | Cable routed along the eave and through the gutter, priced by linear footage and control setup. |
| Complex or large-scale job | On estimate | Roofs with multiple pitches, unusual panels, or high access need an on-site look before a number is given. |
| Travel | Included | in Des Moines and surrounding areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walk with photo documentation and a repair-or-replace call in writing |
| Panel and fastener repair | Starting at $450 | Re-fasten and replace lifted panels on one slope, priced by panel count and access |
| Flashing and seam reseal | Starting at $650 | Rebuild chimney or skylight flashing and reset lifted seams, priced by penetration count |
| Slope replacement | On estimate | Tear off and rebuild a damaged slope with matching profile, priced after deck inspection |
| Emergency watertight repair | Starting at $350 | Same-week tarping and temporary sealing when a storm opens the roof to water |
| Travel | Included | In Des Moines and surrounding Polk County areas, no separate call-out or mileage fee |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | Covers panels, seams, fasteners and flashing with a written photo report on accessible roofs. |
| Insurance documentation inspection | Starting at $250 | Measured hail and wind damage report with dated photos, panel counts and cause notes for adjusters. |
| Pre-purchase inspection | Starting at $300 | Condition and remaining service life report timed around a real estate closing date. |
| Steep or complex roof inspection | On estimate | Multi-gable, three-story or drone-assisted roofs need an on-site look before pricing. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (515) 461-7188, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes 5-inch or 6-inch seamless aluminum, hangers, downspouts, and cleanup on standard access. |
| Oversized 6-inch with 3x4 downspouts | Starting at $14/linear ft | Higher-volume trough and larger downspouts for long standing seam panel runs and fast runoff. |
| Leaf guard system | Starting at $6/linear ft additional | Micro-mesh or reverse-curve guard fitted and flow-tested, priced by footage on top of the gutter run. |
| Copper or specialty metal gutter | On estimate | Custom fabrication and patina material require an on-site look at profile, trim, and roof material. |
| Fascia repair before hanging | On estimate | Rotted trim or rafter tails must be replaced before hangers go in, priced after inspection. |
| Travel | Included | In Des Moines and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal roof repair on barn or shop | Free estimate | Covers leak diagnosis, fastener check and flashing inspection, priced after we see roof access and panel condition. |
| Screw replacement and re-fastening | Starting at $450 | Includes pulling failed screws, replacing washers and sealing, with price rising on larger roofs and heavy corrosion. |
| New exposed-fastener panel roof | Starting at $3.50 per sq ft installed | Includes panels, screws, closures and basic flashing, with price moving on gauge, insulation and tear-off. |
| Standing seam or insulated panel system | On estimate | Concealed-fastener and insulated systems need an on-site look at purlins, deck and building use before pricing. |
| Travel | Included | in Des Moines and surrounding central Iowa towns, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (515) 461-7188, with no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Des Moines want more than a crew with a truck. They want straight answers about whether their roof can be repaired or should be replaced, and a clear explanation of what a metal roof will and will not do for their home. Des Moines Metal Roofing is a local contractor serving Des Moines and the surrounding communities, including West Des Moines, Ankeny, Urbandale, and Johnston. Our work covers metal roof installation, full replacement, re-roofing, and repair, with a focus on the steep pitches, heavy tree cover, and seasonal exposure that define roofs across Polk County.
This is a market with a large stock of aging exposed-fastener roofs, many now 15 to 30 years old, where fasteners are backing out and washers are drying out. It is also a market where hail, straight-line winds, and ice damming at the eaves are real annual concerns. We match the system to the house rather than pushing one product, and we tell you plainly when the cheaper repair is the right call. If you want an honest assessment from a network of licensed, insured local contractors, call (515) 461-7188 or request a free estimate.
Most metal roof leaks in Des Moines do not start where the water shows up inside. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water works past the screw head and travels along purlins and decking, sometimes several feet from the entry point before it stains a ceiling. Seam separation from thermal movement is the second common failure, followed by failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted or peeled panels after a storm, and punctures from fallen limbs. Ignoring any of these allows water to rot sheathing and saturate insulation, which turns a modest repair into a much larger project.
Our metal roof repair work starts with finding the actual source, not just patching the stain. For active leaks, we trace the path and address the failed component, whether that is a metal roof leak repair at a flashing detail or a broader screw replacement and re-fastening scope. A full screw replacement with new fasteners and sealing washers often restores a watertight roof for a fraction of replacement cost, and we will say so when that is the honest answer.
The repair versus replace call comes down to the condition of the panels, the deck, and the fastening pattern. If the metal is sound and the leaks are isolated to fasteners and flashing, repair is usually the right move. If panels are corroded through, seams are failing across the field, or the deck is soft, replacement makes more financial sense than repeated patches. We explain which category your roof falls into before any work begins. Call (515) 461-7188 to schedule an inspection, or contact us to describe what you are seeing.
We install the full range of metal systems, and the right one depends on the house, the budget, and how much maintenance the owner wants to accept. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, and clean lines that suit everything from Prairie School homes to newer two-story subdivisions. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, workshops, and agricultural buildings. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over the life of the roof. For homeowners weighing a Metal Roof Over Shingles (Retrofit), that can be a legitimate option when the existing deck is sound and local code allows it. When the deck is questionable, a full tear-off and Metal Roof Replacement is the better path. We will tell you which applies to your roof.
Metal roof pricing in Des Moines is typically quoted per square foot for installations, while repairs are often flat-rate depending on scope. The variables that move the number most are the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access around the home. A simple low-slope ranch and a steep-gabled Victorian in Sherman Hill do not carry the same labor, and we price accordingly rather than quoting a single number over the phone. You can review general ranges on our pricing page, but final pricing depends on the roof and site conditions.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer and is never a promise. The most useful next step is a free estimate or free roof inspection so you have real numbers for your specific roof. Request a free estimate and we will walk you through the options, including where a repair is the smarter spend.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. Our role is to document conditions accurately and complete the work once you and your carrier have made your decisions.
On permits, this is informational only. In most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also affect panel profile and color choices, particularly in older neighborhoods. Requirements vary, so always verify with the Des Moines building or planning department before starting your project. If you have questions about how permitting affects your project, contact us and we will point you to the right authority.
Ready to get started? Des Moines Metal Roofing serves in Des Moines and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188
Your Free Quote Request