Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Waukee, IA (50263) · Local Professionals

Des Moines Metal Roofing · Fast response in Waukee and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Waukee grew up fast, and you can see it in the rooftops: two-story vinyl-and-brick homes in subdivisions off University Avenue and Highway 6, newer builds near the Waukee Community School District campuses, and older farmhouses out toward the county line. Most of these roofs are architectural shingles, and after a few Iowa hail seasons they start to show it.

We are Des Moines Metal Roofing, and we work Waukee (50263) every week. Homeowners call us when their shingles are getting chewed up by hail, when wind peels back a ridge cap, or when they are ready to stop replacing asphalt every 15 years. We install standing seam and stone-coated steel that stand up to the same storms that roll across Dallas County.

Metal Roofing in Waukee (50263)

Waukee sits on gently rolling ground with heavy black prairie soil, and that matters for roofing. Newer subdivisions off Ashworth Road and Southeast Waukee Boulevard have tight lots with mature landscaping, so we plan panel staging and dumpster placement carefully to avoid ruts and damaged shrubs. The grade on some of the walkout lots near the Waukee trails means we are often working off ladders on a slope, not a flat driveway. And because most of these homes are 10 to 25 years old, we frequently find the original shingles are at the end of their life while the decking underneath is still solid, which makes a metal roof over shingles a practical option.

Our team has installed and repaired metal roofs across the Des Moines metro, from the older neighborhoods in Beaverdale and Sherman Hill to the newer subdivisions in Waukee, Urbandale, and Ankeny. We know how hail hits here, how ice dams form at the eaves, and how fast a spring derecho can peel back a poorly fastened panel.

Our services in Waukee

How a Job Works in Waukee

Step 1: You call (515) 461-7188 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you. We check fasteners, seams, flashing, and attic ventilation, and we give you a written scope with pricing before any work starts.

Step 2: Once you approve, we pull the roofing permit through the City of Waukee building department and coordinate any HOA design review if your subdivision requires it. On install day we protect landscaping, stage materials on the driveway or street per city rules, and keep the site secure. For a typical Waukee subdivision home, a standing seam or stone-coated steel install takes several days depending on roof complexity and weather.

Step 3: We clean up completely, magnet-sweep the yard and driveway for nails, and walk the finished roof with you. We do not leave until you have seen the work, understand the warranty, and have our contact info for any follow-up.

Pricing in Waukee depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Smaller jobs like metal roof repair or leak repair start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. Stone-coated steel and metal shingle roofs start around $9 per square foot. Every roof is different, so we give you a firm written estimate after we see the property. Call (515) 461-7188 for a free estimate in Waukee.

My Waukee subdivision has an HOA. Will a metal roof be approved?
Many Waukee HOAs allow metal roofing, but most require a design review before installation. We can provide panel profiles, color samples, and manufacturer specs to submit with your HOA application. If your HOA has restrictions on color or profile, we will help you choose a standing seam or stone-coated steel option that meets the rules and still gives you the hail and wind resistance you want.
A storm just peeled back part of my roof in Waukee. How fast can you get out?
We prioritize active leaks and storm damage in Waukee and the surrounding area. Call (515) 461-7188 and we will schedule an inspection as soon as possible, often the same day or next. We can tarp or temporarily secure the roof to prevent further water damage, then provide a written repair estimate and documentation for your insurance claim.
What does a metal roof cost for a typical Waukee two-story home?
Most Waukee subdivision homes are in the 2,000 to 3,000 square foot range with moderately pitched roofs. For that size, a standing seam metal roof typically starts around $10 per square foot, while a stone-coated steel or metal shingle roof starts around $9 per square foot. A retrofit over existing shingles can start around $7 per square foot. Complex rooflines, steep pitches, and multiple valleys add cost. We give you an exact price after a free on-site estimate.
Do I need a permit from the City of Waukee for a metal roof?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Waukee. Permit thresholds, fees, and inspection requirements are set by the City of Waukee building department, and rules can change, so we confirm the current requirements before we start. We handle the permit application and inspections as part of the job, and we can tell you what to expect for your specific address.
My neighbor's tree hangs over my property line in Waukee. Can you help with a roof repair and do I need to talk to them?
We can repair the roof damage regardless of where the tree came from. Property line disputes are a civil matter between neighbors, so we do not get involved in those. If limbs are rubbing or dropping debris on your roof, we recommend talking with your neighbor about trimming. We can document the damage for your records or insurance, and we can install leaf guards or adjust flashing to reduce future problems.
Are you insured for work on my Waukee property?
Yes. We carry general liability insurance and workers' compensation coverage. That coverage protects you if anything goes wrong on the job, and it means our crew is covered while they are on your roof.
What maintenance does a metal roof need in Waukee's climate?
Metal roofs are low maintenance, but Iowa weather still demands a look now and then. We recommend an annual inspection, especially after hail season, to check fasteners, seals, and flashing. Gutters should be cleaned in late fall after the maples and oaks drop leaves. In winter, keep an eye on ice dams at the eaves and avoid walking on the roof when it is icy. If you see loose screws or a lifted panel, call us at (515) 461-7188 before small issues become leaks.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm