Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Des Moines, IA (50309) · Local Professionals

Des Moines Metal Roofing · Fast response in Des Moines and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Des Moines is a city of old trees and older roofs. From the steep gables of Sherman Hill Victorians to the low-slung ranches of the south side, every neighborhood here has its own roofline story, and most of those stories involve hail, wind, and heavy snow.

If you own a home in 50309 or anywhere around the metro, you've probably seen what a derecho or a spring hailstorm can do to asphalt shingles. That's why more homeowners call Des Moines Metal Roofing. We're local, we know the housing stock from Beaverdale brick Tudors to Ankeny subdivision two-stories, and we install and repair metal roofs built for this climate.

Metal Roofing in Des Moines (50309)

Des Moines sits where the Des Moines and Raccoon rivers meet, on flat to gently rolling glacial till and black prairie soil. That soil moves with the seasons, and it puts extra stress on roof edges and flashing details. Older neighborhoods like Sherman Hill, Capitol East, and the Drake area have steep roofs and tight lots, so staging materials and getting equipment in and out takes planning. In Beaverdale and Waterbury, the 1920s brick Tudors and bungalows often have original roof decks that need a careful once-over before we cover them. Out west in West Des Moines, Urbandale, and Waukee, newer homes with low-pitch roofs are prime candidates for standing seam or stone-coated steel because those profiles shed hail and wind better than shingles.

Our team has worked on every kind of roof this city has, from Victorian slate replacements to retrofit metal over shingles on 1970s ranches. We know how hail dents different metals, how ice dams form at the eaves on high-elevation homes, and why screw replacement matters after a derecho. We serve Des Moines and the surrounding suburbs, and we bring the same approach to a small leak repair in Highland Park as we do to a full standing seam install in Johnston.

Our services in Des Moines

How a Job Works in Des Moines

Step 1: You call us at (515) 461-7188 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We'll walk the roof, check the deck, flashing, and fasteners, and talk through options that fit your home and budget. If you're in a historic district or an HOA, we'll flag that early so there are no surprises.

Step 2: Once you approve the scope, we pull the required permits. Roofing permits are commonly required for full replacements and re-roofs in Des Moines, and thresholds vary by jurisdiction. We coordinate with the local building department and, if needed, historic review or HOA design approval. On tight lots in Sherman Hill or Capitol East, we plan material drops and dumpster placement carefully so we don't block alleys or neighbors. Then our crew gets to work, protecting landscaping and keeping the site secure each day.

Step 3: After the last panel or shingle goes down, we do a full cleanup, magnet sweep for nails, and a final walkthrough with you. We make sure gutters and downspouts are clear and that everything meets code. We leave your property clean and your roof ready for the next Iowa storm.

Pricing in Des Moines depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450, leak repairs at $450, and screw replacement or re-fastening at $750. Coating and painting starts at $2.50 per square foot, and snow guards start at $1,200. Storm and wind damage inspections are free. For a realistic number for your home, call (515) 461-7188 and we'll schedule a free estimate.

My Beaverdale Tudor has its original roof deck. Can you install metal over it?
We can often install metal over existing shingles if the deck is sound and local code allows it. We'll inspect the deck and flashing first, and if there's any rot or soft spots, we'll recommend repairs before we cover it. In older homes like those in Beaverdale and Waterbury, we frequently find layers of old roofing, so we check the number of existing layers against code limits before recommending a retrofit.
A storm just peeled back some panels on my roof in Des Moines. How fast can you respond?
We prioritize active leaks and storm damage. Call (515) 461-7188 and we'll schedule an inspection as soon as possible, often the same day or next. We can tarp or secure the area to prevent further water damage, then provide a written scope for repair or replacement. We also document damage for insurance claims, though coverage decisions are up to your insurer.
What does a typical metal roof cost for a ranch home in West Des Moines?
For a 1,500 to 2,000 square foot ranch with a low pitch, a basic corrugated panel roof might start around $8,000 to $12,000, while standing seam could run $15,000 to $22,000. Factors like tear-off, deck repairs, and trim details affect the final price. We give free estimates and explain the options clearly.
Do I need a permit for a metal roof in Des Moines, and where do I check the rules?
Yes, a roofing permit is commonly required for a full replacement or re-roof. Requirements and fees vary, so it's best to verify with the city. You can start at the City of Des Moines website (https://www.dsm.city/) or call the building department. We handle permit applications as part of our service.
My neighbor's tree hangs over my roof. Who is responsible for cleanup and damage?
In Iowa, you generally have the right to trim branches that overhang your property line, but you should talk with your neighbor first. If a storm causes a limb to fall on your roof, your insurance typically covers the damage. We can inspect and repair any damage, and we'll document the cause for your claim. For HOA neighborhoods, check your covenants for any additional rules.
Are you fully insured for work on my Des Moines property?
Yes, we carry general liability insurance and workers' compensation coverage. That protects you if anything goes wrong on the job.
What maintenance does a metal roof need in Des Moines to handle snow and ice?
Metal roofs shed snow well, but ice dams can still form at the eaves if attic insulation or ventilation is poor. We recommend annual inspections, especially after winter, and adding snow guards above walkways and doors. We also check fasteners and seals, since freeze-thaw cycles can loosen screws over time. A coating every 10 to 15 years can extend the life of painted panels.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm