Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Urbandale, IA (50325) · Local Professionals

Des Moines Metal Roofing · Fast response in Urbandale and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Urbandale is a city of contrasts: mid-century ranches and split-levels with low-pitch roofs in neighborhoods like Merle Hay and Highland Park, and newer two-story homes with architectural shingles out toward 156th Street and beyond. The lots are generous, the trees are mature, and the weather is pure Iowa, with hail, derechos, and ice dams that test every roof.

Homeowners in Urbandale (50325) call Des Moines Metal Roofing because we know these roofs firsthand. From the brick ranches near Urbandale High School to the vinyl-and-brick subdivisions off Douglas Avenue, we have installed, repaired, and replaced metal roofing on every style of home this city has to offer.

Metal Roofing in Urbandale (50325)

Urbandale's housing stock ranges from 1950s and 60s ranches with low-slope shingle roofs to newer subdivision homes with steep gables and complex roof lines. The older ranches often have minimal attic ventilation and layers of old shingles, which makes them prime candidates for a metal roof over shingles retrofit or a full tear-off and replacement. The newer homes, especially those with architectural shingles, are increasingly switching to standing seam and stone-coated steel for hail and wind resistance. The flat to gently rolling terrain means water drains toward foundations if gutters and downspouts are not sized correctly, and mature maples and oaks drop limbs that can puncture panels or clog valleys. We account for all of this when we assess your roof.

Our team has worked throughout Urbandale and the surrounding Des Moines area, from the homes near Walker Johnston Park to the commercial strips along Merle Hay Road. We understand the local building department's requirements and the inspection process, and we know how to coordinate with HOAs to get the right panel profile and color approved.

Our services in Urbandale

How a Job Works in Urbandale

Step 1: You call us at (515) 461-7188 or request a free estimate online. We schedule an on-site assessment at your Urbandale property, where we inspect your existing roof, attic, and flashing, and discuss your goals and budget. We provide a written estimate with clear pricing and options.

Step 2: Once you approve, we pull the necessary permits from the City of Urbandale and schedule the work. On installation day, our crew arrives with materials and equipment. For homes with tight lot access or steep driveways, we plan ahead for material delivery and staging. We protect your landscaping and coordinate with your HOA if required.

Step 3: After the work is complete, we clean the site thoroughly, using magnets to pick up nails and debris. We walk the roof with you to review the finished job, answer questions, and ensure you are satisfied. We leave your property clean and your new metal roof ready to protect your home for decades.

Metal roofing costs in Urbandale depend on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm and wind damage repair and metal roof inspections. For a precise quote tailored to your Urbandale home, call us at (515) 461-7188.

My Urbandale ranch has a low-pitch roof with two layers of old shingles. Can you install metal over it?
In many cases, yes. Iowa code allows a metal roof over existing shingles if the total number of layers does not exceed what the code permits, and the roof structure can handle the added weight. We will inspect your roof and attic to confirm suitability. If it is not a good candidate, we will recommend a full tear-off and replacement.
A storm just blew through Urbandale and lifted some panels on my metal roof. How quickly can you respond?
We prioritize storm damage calls. Call us at (515) 461-7188 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof to prevent further damage and provide a detailed estimate for repairs, which you can submit to your insurance company.
What is the typical cost for a metal roof repair in Urbandale?
Most metal roof repairs start at $450, but the final cost depends on the extent of the damage, the type of metal roof, and accessibility. For example, a simple leak repair might be on the lower end, while replacing a section of standing seam panels could be higher. We provide a free estimate before any work begins.
Do I need a permit to replace my roof in Urbandale, and how do I get one?
Yes, a permit is typically required for a full roof replacement or re-roof in Urbandale. The City of Urbandale website (https://www.urbandale.org/) has information on permits and inspections, or you can contact the building department directly. We handle the permit application process for you as part of our service.
My HOA requires approval for exterior changes. Can you help with the approval process for a metal roof?
Absolutely. We work with many HOAs in Urbandale and can provide the necessary documentation, such as product specifications, color samples, and installation details, to submit to your HOA board. We will coordinate with them to ensure the chosen metal roof meets their guidelines.
Are you fully insured for roofing work in Urbandale?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Urbandale, and what maintenance does it need?
We recommend an inspection every two to three years, especially after major storms. Urbandale's freeze-thaw cycles and summer humidity can loosen fasteners and promote algae growth. Regular maintenance includes checking and tightening fasteners, cleaning gutters, and removing debris. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm