Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Ames, IA (50012) · Local Professionals

Des Moines Metal Roofing · Fast response in Ames and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Ames is a city of two rooflines: the steep, mature trees and older homes near the Iowa State campus, and the newer subdivisions out toward North Grand and South Duff where the wind really moves across the open ground. If you live in an older house near Welch Avenue or in a newer build off George Washington Carver Avenue, your roof is dealing with the same prairie weather, just in different ways.

We are Des Moines Metal Roofing, and we work Ames and the surrounding area because we know what hail, ice dams, and straight-line winds do to both a 1920s bungalow and a 2015 two-story. When you call us at (515) 461-7188, you get a local crew that can tell the difference between a roof that needs a repair and one that is ready for replacement.

Metal Roofing in Ames (50012)

Ames sits on gently rolling ground with heavy black prairie soil, and that matters for your roof more than you might think. Older homes near campus often have steep gables and small lots with mature maples and oaks, so access can be tight and shade keeps roofs damp longer, which feeds moss and algae. Newer subdivisions on the north and south sides have low-pitched roofs and wide open exposure to wind, hail, and summer sun. We see a lot of failed fasteners and separated seams after a derecho, and ice dams at the eaves on older homes with poor attic ventilation. Metal roofing solves many of these problems, but only if it is installed with the right underlayment, flashing, and fastening pattern for the specific house.

Our team has worked on everything from standing seam on a newer build in North Ames to metal shingle replacement on a 1950s ranch near Brookside Park. We pull permits with the city, coordinate with HOAs where they exist, and make sure the job matches how your house actually sheds water.

Our services in Ames

How a Job Works in Ames

Step 1: You call (515) 461-7188 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you. We check for hail damage, loose fasteners, flashing issues, and attic ventilation, and we give you a written scope with pricing before any work starts.

Step 2: Once you approve, we handle the permit with the city of Ames and schedule the work. On tight lots near campus or in older neighborhoods, we plan material delivery and dumpster placement carefully so we do not block driveways or damage landscaping. For standing seam or metal shingle jobs, we protect the siding and windows, and we keep the site organized. If your home is in a historic district or has HOA design rules, we help you submit the right paperwork before we order materials.

Step 3: When the job is done, we do a full cleanup, including magnetic sweeps for nails and a final walkthrough with you. We do not leave until you have seen the finished roof and know what to expect for maintenance.

Pricing in Ames depends on the size and pitch of your roof, how many layers are already there, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. We offer free inspections and estimates for storm and wind damage, and we document everything for your insurance claim. Call (515) 461-7188 to get a real number for your house.

My 1920s bungalow near Welch Avenue has steep gables and big trees overhead. Can you install a metal roof without damaging the landscaping?
Yes. On older Ames lots with mature trees and tight access, we use smaller delivery vehicles when needed, protect shrubs and flower beds with tarps and plywood, and plan the dumpster placement so it does not sit on your lawn or block the alley. We also check the roof deck and flashing carefully on older homes because steep gables and shade can hide rot and moss.
A storm just knocked limbs onto my roof in Ames. How fast can you get out for an inspection?
We prioritize storm and wind damage calls in Ames and the surrounding area. Call (515) 461-7188 and we will schedule a free inspection as soon as possible, usually within a day or two depending on volume. We document the damage with photos and a written report you can use for your insurance claim, and we can do temporary leak repairs if needed.
What does a typical metal roof replacement cost for a ranch home in North Ames?
Most ranch homes in Ames fall in the range of $9 to $14 per square foot for a metal roof replacement, depending on the material, roof pitch, and whether we remove the old shingles. That means a 1,500 square foot roof often lands between $13,500 and $21,000. Standing seam runs higher, and retrofit over existing shingles can save money. Call (515) 461-7188 for a free estimate based on your exact roof.
Do I need a permit from the city of Ames to replace my roof, and does the city have any rules about metal roofing?
Yes, the city of Ames generally requires a roofing permit for a full replacement or re-roof, and the rules vary depending on the scope of work and whether your home is in a historic district. We handle the permit application and inspections for you. If your home is in a designated historic area or has HOA design review, we help you get approval for the panel profile and color before we order materials.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage problems on their side. What should I do?
We check property lines and drainage during the estimate. If your roof runoff currently flows toward a neighbor's lot, we can adjust gutters, downspouts, or flashing to keep water on your property. If your neighborhood has an HOA, we also help you submit the required design approval. It is always better to sort this out before installation, and we will walk the property line with you.
Are you insured for roofing work at my Ames home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Ames to handle ice dams and summer storms?
In Ames, the main things are keeping gutters and downspouts clear, checking fasteners and sealant after a big hail or wind event, and making sure attic ventilation is working so ice dams do not form at the eaves. We recommend a professional inspection once a year, especially after storm season, and we offer free estimates for any repairs. Snow guards are also worth considering on steep roofs where snow slides off over walkways or doors.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm