Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Altoona, IA (50009) · Local Professionals

Des Moines Metal Roofing · Fast response in Altoona and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Altoona is the kind of town where a metal roof just makes sense. Between the older ranches and split-levels off 8th Street and the newer two-story homes going up east of Adventureland, most of these roofs take a beating from hail, wind, and ice dams every year. If you live near the Hy-Vee on 1st Avenue or out by the Altoona Campus, you already know how fast a spring storm can roll through and leave shingles in the yard.

We are Des Moines Metal Roofing, and we have been working on roofs across Polk County for years. When homeowners in 50009 call us, it is usually because they are tired of replacing asphalt shingles every 12 to 15 years. We give them a straight answer about whether a metal roof over shingles or a full replacement makes more sense for their house, their budget, and the way the weather hits this part of Iowa.

Metal Roofing in Altoona (50009)

Altoona sits on gently rolling ground with heavy clay and prairie soil, so drainage and grade matter more than people think. A lot of the older homes near the Altoona Elementary area have low-pitched roofs that were built for shingles, and those are prime candidates for a metal roof over shingles retrofit. The newer subdivisions east of town, closer to the Outlets of Des Moines, tend to have steeper roofs and tighter lot lines, which means we plan access and staging carefully so we do not tear up your landscaping or block your neighbor's driveway. Ice damming is a real issue on the north-facing slopes of the split-levels and ranches around 8th Street and the older parts of town, and that is one reason standing seam and stone-coated steel have become popular here. We also see a lot of wind-lifted panels and failed fasteners after the straight-line winds that come through in July and August.

Our team has worked on everything from 1950s brick ranches to new construction in the Altoona Campus area. We know what the local building department looks for, and we know how to document storm damage so your insurance claim is as smooth as possible.

Our services in Altoona

How a Job Works in Altoona

Step 1: You call us at (515) 461-7188 or fill out the form on this page. We schedule a free on-site assessment, usually within a couple of days, and we walk the roof with you. We check for hail damage, lifted panels, failed fasteners, and flashing issues, and we give you a written estimate before any work starts. No pressure, no sales pitch.

Step 2: Once you approve the estimate, we pull the permits with the City of Altoona and schedule the work. If you live in an HOA, we help you get the color and panel profile approved before we order materials. On tight lots near the Altoona Campus or downtown, we stage materials in the driveway or on the street according to city rules, and we protect your siding, windows, and landscaping with tarps and plywood.

Step 3: When the job is done, we clean up every nail and scrap with a magnet sweep, haul away the old roofing, and walk the finished roof with you. We do not leave until you are satisfied and you know how to maintain your new metal roof.

Pricing in Altoona depends on the size of your roof, the pitch, how many layers of shingles are already there, and whether we are doing a repair or a full replacement. For a typical ranch or split-level in 50009, a metal roof over shingles retrofit starts around $7 per square foot, and a full replacement starts around $9 per square foot. Standing seam runs a bit more, starting at $10 per square foot, and corrugated or ribbed panel roofing is the most economical option at $5.50 per square foot. Small repairs, like fixing a leak or replacing a few fasteners, start at $450. We always give you a free estimate with a clear breakdown, so you know exactly what you are paying for. Call (515) 461-7188 to get started.

My house near the Altoona Campus has a low-pitched roof with two layers of shingles. Can you install metal over it?
Probably, but it depends on the condition of the shingles and the local code. Iowa code generally allows a metal roof over one layer of shingles, but not two. We will inspect the roof and let you know if a tear-off is required. If it is, we will include that in your estimate.
A storm just came through and lifted some panels on my roof near 8th Street. How fast can you get out there?
We prioritize storm damage calls. Call us at (515) 461-7188 and we will schedule an inspection as soon as possible, usually within 24 to 48 hours. If there is an active leak, we can tarp it temporarily to prevent further damage.
What is the average cost for a metal roof replacement on a 1,500 square foot ranch in Altoona?
For a 1,500 square foot ranch with a simple gable roof, a full metal roof replacement typically starts around $9 per square foot, so you are looking at roughly $13,500 and up, depending on pitch, access, and material choice. A metal roof over shingles retrofit would be closer to $7 per square foot. We give free estimates so you can get an exact number.
Do I need a permit from the City of Altoona to replace my roof?
Yes, a roofing permit is generally required for a full replacement or re-roof in Altoona. The permit fee and inspection requirements vary, so we always check with the City of Altoona Building Department before we start. We handle the paperwork for you.
My HOA requires approval for roof color. Can you help with that?
Yes. We work with HOAs in Altoona regularly. We can provide color samples and manufacturer documentation for your HOA review, and we will not order materials until you have written approval. We can also advise on panel profiles that meet HOA design standards.
Are you insured for work on my Altoona property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Altoona's climate?
Check for loose fasteners and debris in the gutters every spring and fall. After a hailstorm, look for dents or paint damage. We recommend a professional inspection every two to three years, especially on older homes with ice dam potential. Call us at (515) 461-7188 to schedule a maintenance check.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm