Serving the Des Moines area  ·  (515) 461-7188  ·  Open Mon-Sun 7am-7pm
📞 (515) 461-7188 Free Quote

Metal Roofing in Pleasant Hill, IA (50327) · Local Professionals

Des Moines Metal Roofing · Fast response in Pleasant Hill and the Des Moines area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+160Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pleasant Hill is the kind of place where a lot of homes sit on generous lots east of Des Moines, many built in the last thirty years with low-slope roofs that take a beating from hail and wind. You see it all along University Avenue and out toward Copper Creek: two-story vinyl-and-brick homes and scattered ranches, with a few older farmhouses mixed in.

When your shingles start curling or a storm peels back a panel, you want a crew that knows Polk County weather and the local housing stock. We are Des Moines Metal Roofing, based right here in Des Moines, and we serve Pleasant Hill (50327) with metal roof replacement, gutters, and repairs that hold up to Iowa summers and winters. Call (515) 461-7188 and we will come take a look.

Metal Roofing in Pleasant Hill (50327)

Most of Pleasant Hill sits on flat to gently rolling ground, and the soil is that black prairie till you find all over Polk County. That matters for drainage: after a heavy spring storm, water can pool near foundations and along fence lines if gutters and downspouts are not sized right. We see a lot of newer subdivisions where the grade was graded tight and the roof pitch is low, so ice dams and wind-driven rain are common at the eaves. The housing mix here is mostly 1990s to 2020s two-story homes with architectural shingles, plus some 1950s to 1970s ranches closer to the older part of town. Those low-slope ranches are prime candidates for metal roof over shingles (retrofit) because you can add a metal roof without tearing off the old layers, as long as code allows it. We also work on the occasional older farmhouse with a steeper gable, where flashing and chimney details need extra care. Our team has been serving Pleasant Hill and the surrounding Des Moines metro for years, and we know how to work around the tight lot lines and HOA rules you find in neighborhoods like Copper Creek and the streets off Four Mile Drive.

Our services in Pleasant Hill

How a Job Works in Pleasant Hill

Step 1: You call (515) 461-7188 or fill out our form, and we set up a free on-site assessment. We walk the roof, check the attic if you have one, and look at gutters, flashing, and any storm damage. We give you a written estimate with options, including metal roof replacement, retrofit over shingles, or a repair if that is all you need.

Step 2: Once you approve, we pull the permit with the City of Pleasant Hill (roofing permits are typically required for a full replacement, and rules vary by jurisdiction, so we verify with the local building department). We schedule around weather and order materials. On installation day, we protect your landscaping and driveway, then tear off or prep the roof, install underlayment and panels, and handle flashing and vents. If your neighborhood has an HOA, we help you get the color and profile approved before we order.

Step 3: We clean up every nail and scrap, run a magnet over the yard, and do a final walkthrough with you. We do not leave until you are satisfied and we have shown you how the new roof and gutters work.

Pricing in Pleasant Hill depends on the size and pitch of your roof, how many layers you are removing, and whether you need gutters or repairs. For a typical ranch or two-story home here, metal roof replacement starts around $9 per square foot, and standing seam starts around $10 per square foot. If you qualify for a retrofit over existing shingles, that starts around $7 per square foot. Gutters for metal roofs start at $9 per linear foot. Smaller jobs like flashing repair or a leak fix start around $450, and screw replacement and re-fastening starts at $750. Storm and wind damage inspections are free. We give you a clear written estimate before any work begins, so you know what to expect. Call (515) 461-7188 for a free estimate.

My house is in the Copper Creek area and has a low-pitch roof. Can you install metal over the existing shingles?
Yes, in many cases. Metal roof over shingles (retrofit) is common on Pleasant Hill homes with low-slope roofs because it saves on tear-off and disposal. But code limits how many layers you can have, and we need to check the decking and flashing first. We will tell you honestly whether a retrofit or a full replacement is the better call for your home.
A storm just blew through Pleasant Hill and I think I have wind damage. How fast can you get out?
We offer free storm and wind damage inspections in Pleasant Hill and can usually get out within a day or two after a major storm. Call (515) 461-7188 and we will schedule a time to check for lifted panels, separated seams, or missing fasteners. If it is an active leak, we will help you get it tarped or repaired quickly.
What does a metal roof cost for a typical three-bedroom ranch in Pleasant Hill?
For a ranch around 1,500 to 2,000 square feet, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam runs closer to $10 per square foot. A full replacement with tear-off typically starts around $9 per square foot. The exact price depends on roof complexity, access, and whether you add gutters or snow guards. We give free estimates at (515) 461-7188.
Do I need a permit from the City of Pleasant Hill for a metal roof replacement?
In most cases, yes. The City of Pleasant Hill requires a roofing permit for a full replacement or re-roof, and the rules on fees and inspections vary. We handle the permit application and coordinate with the local building department so you do not have to. We always defer to the city for final requirements.
My HOA in Pleasant Hill has design rules. Can you help with approval for a metal roof color?
Yes. Many HOAs in Pleasant Hill subdivisions restrict panel profiles and colors. We can provide product samples, manufacturer specs, and color chips to submit to your HOA board. We will not order materials until you have written approval, so you are not stuck with a color that gets rejected.
Are you insured for work on my Pleasant Hill home?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything goes wrong on the job.
What should I do to maintain my metal roof in Pleasant Hill between seasons?
Keep gutters clear of leaves and shingle grit, especially in the fall. Check for loose screws or lifted panels after big storms. In late winter, watch for ice dams at the eaves, which are common on low-slope homes here. A quick annual inspection can catch small issues before they become leaks. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Des Moines

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Des Moines

All your work handled by qualified professionals in Des Moines

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

160+ Verified Client Reviews in Des Moines

⭐⭐⭐⭐⭐ 4.9/5 · 160 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Des Moines · Response within 24h · No commitment · ☎ (515) 461-7188

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Des Moines ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm